| Customization: | Available |
|---|---|
| Certification: | CE, ISO |
| Feature: | Insulated,Heat Resistant,Corrosion Resistant |
|
Still deciding? Get samples of US$ 0.00/Square Meter
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fiberglass Drywall joint Tape is cut by alkaline-resistant fiberglass mesh which is treated by adhensive latex. It owns good performances, like good softness, high stickness, easy application, it gives you the best solution for the wall problems like wall cracks, plasterboards joints, wall holes, etc. and it is the ideal material for the dry wall and ceiling problems. Joint Tape conceals and reinforces gypsum board joints. The tape is buffed on both sides to ensure the best working qualities and bond.
Specification:
Width (mm): 25, 35, 48, 50, 100, 150, 200, 1000, 1200
Length (m): 10, 20, 30, 45, 90, 153
Mass: From 55 to 85g/sq. Meter.
Mesh: 8x8 or 9x9mesh/inch.
Colour: White, yellow, blue etc...
Jumbo roll: 1200mm Xx450m or 900m
Drywall seaming tapes as well as private label and unlabeled tapes.
Each roll is shrink-wrapped, or plastic hand bag.
Other specification are available upon request.
Testing standard: ASTM-D579
How to use:
1. Wall must be clean and dry;
2. Center and apply tape over the length of the joint and pressing firmly;
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.
| Mesh size | Density | Width | Length per roll | Color |
| (mm) | (gr/m2) | (mm) | (m) | |
2.85*2.85 |
50,60,65,70,75,90,etc |
35-2000 |
10-10000 |
All colors |
3.20*3.20 |
||||
Other size |
){kind=link}